C.A.M.P. Turbohand Pro

Making use of proprietary technology and cutting-edge design, the Camp Turbohand Pro makes climbing ropes safer, faster, and easier.
Featuring a proprietary roller that not only helps with climbing efficiency by making its upward glide far smoother, it also helps to reduce potentially dangerous wear and tear on the device in spots where the rope tends to run on the body of a traditional ascender.
Its ergonomic handle extends into the upper part of the spine to allow a double-handed grip, whilst the handles and the rope are aligned on the same plane for ultimate handling and efficiency.
Three large attachment points, two on the bottom and one on the top provide optimal organization, whilst the Turbohand's robust body benefits from a 3.5 mm aluminum alloy construction. The Turbohands toothed cam is finished off with a special anti-wear treatment featuring drain holes that help to prevent the build-up of potentially harmful mud and grit, alongside the opening system, that is protected on both sides to prevent un-intentional openings.

**Technical Specifications**

- Weight - 198 g

- Rope Diameter - Min 8 mm – Max 13 mm

**Details**

- Proprietary roller makes upward glide super smooth and reduces wear and tear

- Toothed cam is finished with an anti-wear treatment and features drain holes for self cleaning

- Ergonomic rubber handle extends into the upper part of the spine for double-handed grip

- 3 large attachment points: two on the bottom and one at the top

- The proprietary roller also allows the Turbohand to be rigged as a locking pulley for light hauling with a max load of 50 kg, 110 lbs. NOTE: This configuration is not intended for hauling or securing of bodies.

- A stainless steel rope guide (Turbohand Guide, sold separately) can be attached to the bottom of the handle to align the rope for long ascents.

- Available in a Left or Right hand variation.